£196.59 inc. tax
Roll Centre Adjusters
Brand: Hardrace
weight: 2000.0 g
Product Code: RCAKIT
Product Condition: New
Hardrace Roll-Center Adjusters are special CNC machined spacers to correct the roll centre on lowered cars. This relieves some of the angle on the driveshaft CV joints and will prolong CV joint life - this is why we call it the Driveshaft Saver. Driveshafts are a common fault with Volvo C30s and it is easy to see why - there are tons of lowered C30s! Even a drop of 50mm can wear driveshafts quickly and they are not cheap to replace.
By installing the Hardrace Roll-Center Adjusters, it will correct the suspension geometry of a lowered car, putting the control arms back closer to its original position, resulting in increased steering response and stability while eliminating bump steer.
- Decrease body roll
- Improves tire contact patch with the road
- Increases steering wheel responsiveness
- Enables increased cornering force
- Prolong driveshaft life
Fitment Notes: Ball Joint size depends on VIN number.
VIN <0000261 = 18mm Ball joint needed
VIN >0000261 = 21mm Ball joint needed
Optional Upgrade Extended Tie Rods:
The OEM Tie Rod Ends will have to be adjusted to compensate your steering angle for the new ball joints. They will toe in without adjustment. Adjusting the OEM Tie Rod ends may result in the Tie Rod End only being attached by a few threads.
The Hardrace Extended Tie Rod Ends have a deeper socket and will have sufficient thread to allow for full adjustment.
Popular Products
C30 Halo Headlight Kit
£35.00
Driveshaft Spacers
£32.99
Ramair Cone Filter
£49.99